- 熱門閱讀
-
-
欄目ID=0的表不存在(操作類型=1)
-
YS/T 1381-2020 銠化合物化學分析方法 砷含量的測定 原子熒光光譜法 Method for chemical analysis of rhodium compounds- Determination of arsenic content-Atomic fluorescence spectrometry
本標準規定了硝酸銠溶液、硫酸銠溶液中砷含量的測定方法。<br />本標準適用于硝酸銠溶液、硫酸銠溶液中砷含量的測定。測定范圍：0.000050%～0.0010%。...
2024-03-15 03:30:01瀏覽：34 原子熒光光譜法Determination
查看 -
-
-
-
ISO/TS 22456-2021 保健產品的滅菌--微生物學方法--生物制劑和組織基產品的生物負荷測定和無菌性試驗指南 Sterilization of healthcare products — Microbiological methods— Guidance on conducting bioburden determinations and tests of sterility for biologics and tissue-based products
1.1 Inclusions<br />1.1.1 This document provides guidance for bioburden testing and tests of sterility for biologics and tissue-based products, where this testing is in relation to product sterilization.<br />NOTE This document is intended to be used in conjunction with ISO 11737-1 and ISO 11737-2. 1.1.2 Guidance in this document can be applicable to biologics and tissue-based products that are not sterile but are microbiologically controlled.<br />1.2 Exclusions 1.2.1 This document does not include guidance for validation requirements for testing, eliminating and/or inactivating viruses and prions or sterilization of tissue-based products.<br />NOTE Guidance on inactivating viruses and prions can be found in ISO 22442-3.<br />1.2.2 This document does not include guidance for containment or biosafety issues for biologics and tissue-based products.<br />1.2.3 This document does not include guidance for testing biologics and tissue-based products for specific infectious agents as listed in relevant national or international guidance (e.g. viruses/protozoa/ parasites, intracellular microorganisms or mycoplasma screening).<br />1.2.4 This document does not include guidance for the acceptance criteria for biologics and tissue- based products during procurement or tissue to be processed and/or released for use. 1.2.5 This document does not include guidance for the testing associated with procurement and screening of biologics and tissue-based products....
2024-03-14 15:15:02瀏覽：101 microbiologicalDeterminationsterilization
查看 -
KS K0731-2017 Test method for the determination of extractable heavy metals in textiles
...
2024-03-14 13:45:01瀏覽：27 DeterminationterminationTextiles
查看 -
-
-
ISO 10471-2018 玻璃增強熱固性塑料(GRP)管--濕條件下長期極限彎曲應變和長期極限相對環撓度的測定 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
This document specifies a method for determining by extrapolation the long-term ultimate ring bending strain and the calculation of the long-term ultimate relative ring deflection of glass-reinforced thermosetting plastics (GRP) pipes, under wet conditions.<br />Two methods of loading are given, one using plates the other beam bars....
2024-03-14 05:15:01瀏覽：27 Determinationterminationconditions
查看 -
ISO 9046-2021 建筑和土木工程密封膠--在恒溫下的粘合/凝聚性能的測定 Building and civil engineering sealants — Determination of adhesion/cohesion properties at constant temperature
The document specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in buildings and civil engineering works....
2024-03-14 04:45:01瀏覽：25 Determination土木工程temperature
查看 -
KS T0202-2018 Determination for bulk thickness of paper and board
...
2024-03-14 04:00:01瀏覽：34 Determinationterminationthickness
查看 -
JB/T 8063.8-2011 粉末冶金材料與制品化學分析方法 第8部分：銅基材料與制品中鐵的測定(EDTA-H<sub>2</sub>O<sub>2</sub>光度法) Methods for chemical analysis of powder metallurgy materials and products—Part 8: The EDTA-H<sub>2</sub>O<sub>2</sub&
本標準規定了測定范圍為＜4%、用 EDTA-H<sub>2</sub>O<sub>2</sub> 光度法測定粉末冶金銅基材料與制品中的鐵含量的方法、試劑、分析步聚、分析結果的計算、允許差以及試驗報告。<br />本標準適用于粉末冶金銅基材料與制品中鐵量的測定。...
2024-03-14 01:45:01瀏覽：23 Determination粉末冶金
查看 -
YY/T 0642-2014 超聲聲場特性 確定醫用診斷超聲場熱和機械指數的試驗方法 Ultrasonics--Field characterization--Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
本標準適用于醫用診斷超聲場。<br />本標準規定了：<br />--有關診斷超聲場熱和非熱的參數；<br />--理論組織-等效模型中，由超聲吸收引起的，與溫升相關的輻照參數的確定方法；<br />--適用于特定非熱效應的輻照參數的確定方法。<br />注1:在本標準第3章，特定參數定義中采用國際單位制(根據ISO/IEC導則，第2部分，第5版的附錄I b)，例如聲束面積和聲強，在實踐中可能采用其十進制的倍數或約數更加便利，在使用和計算數值時，使用者必須將十進制的前綴和單位結合。例如，聲束面積可以用cm<sup>2</sup>為單位，聲強用W/cm<sup>2</sup>或mW/cm<sup>2</sup>為單位。<br />注2:在下文的計算中，對Ml的范圍從0.25MHz～15MHz，TI的范圍從0.5MHz～15MHz。<br />注3:熱指數的穩態估計，基于在符合"0.3dBcm<sup>-1</sup>MHz<sup>-1</sup>衰減模型的勻質組織中"[1]產生1℃組織溫升所需要的聲輸出功率，可能不適用于輻射力成像或采用足夠長的持續時間的脈沖或脈沖串等類似技術所造成的有效瞬態溫升。...
2024-03-06 07:45:01瀏覽：20 characterizationDetermination試驗方法
查看 -
-
