燃燒后捕獲技術發展評價Assessment of Post-Combustion Capture Technology Developments
- 資料類別:
- 資料大?。?/li>
- 資料編號:
- 資料狀態:
- 更新時間:2021-09-22
- 下載次數:次
資料簡介
有幾種方法可以分離和捕獲來自化石燃料發電廠的碳排放 煙氣可分為三大類:預燃、含氧燃料和后燃。 燃燒。EPRI在所有這三個領域都有活躍的項目;然而,這份報告僅限于此 重點關注用于改造或新工廠應用的燃燒后捕獲。 后燃燒過程在煙氣排放之前立即在“尾端”處理煙氣。 來自植物。此時,煙道氣處于或接近大氣壓、溫暖、飽和。 與水蒸氣,并具有約12%的CO2含量。捕獲系統的主要目標是 盡可能經濟地從廢氣中去除高百分比的二氧化碳, 準備永久存放。
There are several ways to separate and capture carbon emissions from fossil fueled power plant flue gas which can be classified into three general categories: pre-combustion, oxyfuel and post- combustion. EPRI has active programs in all three of these areas; however, this report only focuses on post-combustion capture for retrofit or new plant applications. Post-combustion processes treat flue gas at the “tail-end,” immediately before it is exhausted from the plant. At this point, the flue gas is at or close to atmospheric pressure, warm, saturated with water vapor, and has a CO2 content of about 12%. The primary goal of a capture system is to remove a high percentage of carbon dioxide from the effluent gas as economic as possible, and to prepare it for permanent storage.
資料截圖
版權:如無特殊注明,文章轉載自網絡,侵權請聯系cnmhg168#163.com刪除!文件均為網友上傳,僅供研究和學習使用,務必24小時內刪除。
熱門推薦
-
石油化工自動控制設計手冊(第四版) 黃步余 化工出版社 2020年 2021-09-22
-
化工裝置實用操作技術指南 韓文光2001年化學工業出版社 2021-09-22
-
HAZOP分析方法及實踐 粟鎮宇 化學工業出版社2018年 2021-09-22
-
工業除塵設備設計手冊 張殿印 申麗 化工出版社 2012年 2021-09-22
-
加拿大煤炭開采Coal Mining in Canada 2021-09-22
-
化工節能技術手冊 王文堂 2006年化學工業出版社 2021-09-22
-
年終總結新年計劃工作匯報PPT模板 2021-09-22
