CO2捕集氧化燃燒技術CO2 CAPTURE TECHNOLOGIES OXY COMBUSTION WITH CO2 CAPTURE
- 資料類別:
- 資料大小:
- 資料編號:
- 資料狀態:
- 更新時間:2021-09-22
- 下載次數:次
資料簡介
通常用于燃燒的空氣中大約80%的氮氣用于將鍋爐和其他熱回收系統的煙氣二氧化碳含量稀釋到15%以下。燃燒后捕獲過程的目的是將相對稀釋的二氧化碳從大量的煙氣氮氣中分離出來。在氧燃燒過程中,燃燒前空氣中的大量氮被除去。由此產生的燃燒產物將含有高達90%的二氧化碳(干基)。如果法規和地球化學允許,未經處理的、脫水的煙氣可以直接儲存,無需進一步凈化。否則,煙氣中的雜質(主要是O2、N2和Ar)可以通過將煙氣(在中等壓力下)降低到CO2冷凝而雜質不冷凝的溫度來去除。
The nitrogen that is approximately 80% of the air commonly used for combustion serves to dilute flue gas CO2 content to less than about 15% for boilers and other thermal heat recovery systems. Post-combustion capture processes are designed to separate the relatively dilute CO2 from the bulk flue gas nitrogen. In oxy-combustion processes, the bulk nitrogen is removed from the air before combustion. The resulting combustion products will have CO2 content up to about 90% (dry basis). If regulations and geochemistry permit, the raw, dehydrated flue gas may be stored directly without further purification. Otherwise, the flue gas impurities (predominantly O2, N2, and Ar) may be removed by reducing the flue gas (at moderate pressure) to a temperature at which the CO2 condenses and the impurities do not.
資料截圖
版權:如無特殊注明,文章轉載自網絡,侵權請聯系cnmhg168#163.com刪除!文件均為網友上傳,僅供研究和學習使用,務必24小時內刪除。
熱門推薦
-
石油化工自動控制設計手冊(第四版) 黃步余 化工出版社 2020年 2021-09-22
-
化工裝置實用操作技術指南 韓文光2001年化學工業出版社 2021-09-22
-
HAZOP分析方法及實踐 粟鎮宇 化學工業出版社2018年 2021-09-22
-
工業除塵設備設計手冊 張殿印 申麗 化工出版社 2012年 2021-09-22
-
加拿大煤炭開采Coal Mining in Canada 2021-09-22
-
化工節能技術手冊 王文堂 2006年化學工業出版社 2021-09-22
-
年終總結新年計劃工作匯報PPT模板 2021-09-22
