This document gives the safety requirements and measures for stationary, manually loaded and 
unloaded:
— single end tenoning machines with manual feed sliding table;
— single end tenoning machines with mechanical feed sliding table;
— single end tenoning and/or profiling machines with mechanical feed;
— double end tenoning and/or profiling machines with mechanical feed, also designed to be 
automatically loaded/unloaded;
— angular systems for tenoning and profiling with mechanical feed;
with maximum work-piece height capacity of 200 mm for single end machines and 500 mm for double 
end machines, hereinafter referred to as “machines”.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to 
machines, when operated, adjusted and maintained as intended and under the conditions foreseen by 
the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, 
disabling and scrapping phases are taken into account.
NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.st edition 2021-03 Woodworking machines — Safety — Part 12: Tenoning/profiling machines Machines à bois — Sécurité — Partie？12:？Machines？à？tenonner/profiler Reference number ISO 19085-12:2021(E) ？ ISO 2021 ISO 19085-12:2021(E) COPYRIGHT PROTECTED DOCUMENT ？ ISO 2021 All rights reserved. Unless otherwise specified, or required in the context of its impl