A new technique - the direct partial oxidation of methane to synthesis gas using lattice oxygen in molten salts medium has been introduced. Using CeO2 as the oxygen carrier, thermodynamic data were calculated in the reaction process, and the results indicated that direct partial oxidation of methane to synthesis gas using lattice oxygen of cerium oxide is feasible in theory. In a stainless steel reactor, the effects of temperature and varying amounts of γ-Al2O3 supported CeO2 on CH4 conversion,H2 and CO selectivity, were investigated, respectively. The results show that 10% CeO2/γ-Al2O3 has the maximal reaction activity at a temperature of 865 ℃ and above, the H2/CO ratio in the gas that has been produced reaches 2 and the CH4 conversion, H2 and CO selectivity reached the following percentages: i.e.61%, 89%, and 91% at 870 ℃, respectively. In addition, increase of reaction temperature is favorable for the partial oxidation of methane.